View R5984_1300442.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOMULTIPLIER TUBE
R5984
New Electro-Optical Design Wide Effective Area, High Sensitivity Multialkali Photocathode 185 nm to 900 nm, 28 mm (1-1/8 Inch) Diameter, 9-stage, Side-on Type
GNew Electro-Optical Design Structure GWide Effective Area ................................... 10 mm x 24 mm GHigh Cathode Sensitivity (Luminous) ..... 300 A/lm GHigh Anode Sensitivity (Luminous) ......... 3000 A/lm GBasing Diagram is same as the R928
FEATURES
APPLICATIONS
GSpectroscopy GBiomedical GEnvironmental Monitoring
SPECIFICATIONS
GENERAL
Parameter
Spectral Response Wavelength of Maximum Response Photocathode MateriaI Minimum Effective Area Window Material Dynode Structure Number of Stages Direct Interelectrode Capacitances Anode to Last Dynode Anode to All Other Electrodes Base SuitabIe Socket SuitabIe D-Type Socket Assembly Weight Operating Ambient Temperature Storage Temperature
Figure 1: Typical Anode Uniformity
Description/Value Unit
185 to 900 400 Multialkali 10 x 24 UV glass Circular Cage 9 Approx. 4 Approx. 6 11-pin base E678-11A (Sold Separately) E717-63 (Sold Separately) Approx. 45 -30 to +50 -30 to +50 nm nm -- mm -- -- -- pF pF -- -- -- g C C
2.5 0.5 10 MIN. 2.5 0.5
SUPPLY VOLTAGE : 1000 V SPOT SIZE : 0.5 mm WAVELENGTH : 420 mm
CENTER OF PHOTOCATHODE
100
RELATIVE SENSITIVITY (%)
80
60 8 mm 40
MAXIMUM RATINGS (Absolute Maximum Values)
Parameter Value Unit
V V mA Supply Voltage Between Anode and Cathode 1250 Between Anode and Last Dynode 250 Average Anode Current A 0.1 NOTE A: Averaged over any interval of 30 seconds maximum.
* The center of the R5984 photocathode is slightly laid out to the left side from guide key, light path should be adjusted by 2.5 mm to the left side from the guide key.
20
0 8 7 6 5 4 3 2 1 0 1 2 3 4 DISTANCE FROM GUIDE KEY (mm)
TPMSB0122EB
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2002 Hamamatsu Photonics K.K.
PHOTOMULTIPLIER TUBE R5984
CHARACTERISTlCS (at 25 C)
Parameter Cathode Sensitivity Quantum Efficiency at 260 nm (Peak) Luminous A Radiant at 400 nm (Peak) Blue Sensitivity Index (CS 5-58) B Red/White Ratio Anode Sensitivity Luminous D Radiant at 400 nm Gain D Anode Dark Current E After 30 minute Storage in Darkness ENI (Equivalent Noise Input) Time response Anode Pulse Rise Time G Electron Transit Time H Anode Current Stability Current Hysteresis Voltage Hysteresis
J F C
Min.
-- 140 -- -- --
Typ.
26 300 76 9 0.32
Max
-- -- -- -- --
Unit % A/lm mA/W -- -- A/lm A/W
400 -- --
3000 7.6 x 105 1 x 107 5 1.7 x 10-16
-- -- --
-- --
50 --
nA W ns ns % %
-- --
2.2 22
-- --
-- --
0.1 1
-- --
NOTES
A: The light source is a tungsten filament lamp operated at a distribution temperature of 2856 K. Supply voltage is 100 volts between the cathode and all other electrodes connected together as anode. B: The value is cathode output current when a blue filter(Corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source and the tube under the same condition as Note A. C: Red/White ratio is the quotient of the cathode current measured using a red filter (Toshiba R-68) interposed between the light source and the tube the cathode current measured with the filter removed under the same condition as Note A. D: Measured with the same light source as Note A and with the anode-tocathode supply voltage and voltage distribution ratio shown in Table 1 below. E: Measured with the same supply voltage and voltage distribution ratio as Note D after removal of light. F: ENI is an indication of the photon-limited signal-to-noise ratio. It refers to the amount of light in watts to produce a signal-to-noise ratio of unity in the output of a photomultiplier tube. 2q.ldb.G. f S where q = Electronic charge (1.60 x 10-19 coulomb). ldb = Anode dark current (after 30 minute storage) in amperes. G = Gain. f = Bandwidth of the system in hertz. 1 hertz is used. S = Anode radiant sensitivity in amperes per watt at the wavelength of peak response. ENI = G: The rise time is the time for the output pulse to rise from 10 % to 90 % of the peak amplitude when the whole photocathode is illuminated by a delta function light pulse.
H: The electron transit time is the interval between the arrival of delta function light pulse at the entrance window of the tube and the time when the anode output reaches the peak amplitude. In measurement, the whole photocathode is illuminated. J: Hysteresis is temporary instability in anode current after light and voltage are applied. Hysteresis = lmax. - lmin. x 100 (%) li
ANODE CURRENT
li
l max. l min. TIME
0
5
6
7 (minutes)
TPMSB0002EA
(1)Current Hysteresis The tube is operated at 750 volts with an anode current of 1 micro-ampere for 5 minutes. The light is then removed from the tube for a minute. The tube is then re-illuminated by the previous light level for a minute to measure the variation. (2)Voltage Hysteresis The tube is operated at 300 volts with an anode current of 0.1 micro-ampere for 5 minutes. The light is then removed from the tube and the supply voltage is quickly increased to 800 volts. After a minute, the supply voltage is then reduced to the previous value and the tube is re-illuminated for a minute to measure the variation. Table 1: Voltage Distribution Ratio
Electrode Distribution Ratio K 1 Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 1 1 1 1 1 1 1 1 1 P
SuppIy Voltage : 1000 V dc K : Cathode, Dy : Dynode,
P : Anode
Figure 2: Typical Spectral Response
100
TPMSB0163EA
Figure 3: Anode Luminous Sensitivity and Gain Characteristics
104
TPMSB0003EB
108
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
ANODE LUMINOUS SENSITIVITY (A/lm)
AN OD E
IN
TY PI CA L A
GA
OD
E
SE
QUANTUM EFFICIENCY CATHODE RADIANT SENSITIVITY
NS
102
IT
IV
IT
10
SE NS IT IV IT Y
103
107
Y
106
TY P
100
M
IN
IM
UM
IC
1
101
105
104
0.1
10-1
103
0.01 100 200 300 400 500 600 700 800 900 1000
10-2 200
300
500
700
1000
102 1500
WAVELENGTH (nm)
SUPPLY VOLTAGE (V)
Figure 4: Temperature Characteristics of Dark Current (at 1000 V)
100
TPMSB0121EB
ANODE DARK CURRENT (nA)
10
1
0.1
0.01 -30
0
30
50
TEMPERATURE (C)
GAIN
AN
L
PHOTOMULTIPLIER TUBE R5984
Figure 5: Dimensional Outline and Basing Diagram (Unit: mm)
28.5 1.5 10 MIN. 2.5 0.5
33
Figure 6: Socket E678-11A (Sold Separately)
49 38
PHOTOCATHODE
DY6 6
3.5 5
24 MIN.
DY5
5
7
DY7 8 DY8 9 DY9 10 P
29
80 MAX.
DY4 4
94 MAX.
49.0 2.5
1
11 K
DY1
DIRECTION OF LIGHT
18
DY2
2
4
DY3 3
TACCA0064EA
32.2 0.5
11 PIN BASE JEDEC No. B11-88
TPMSA0035EB
Figure 7: D Type Socket Assembly E717-63 (Sold Separately)
5 33.0 0.3 3.5
PMT P R10 DY9 9 R9 DY8 DY7 8 R8 7 R7 DY6 DY5 6 R6 5 R5 4 R4 HOUSING (INSULATOR) DY3 DY2 3 R3 2 R2 DY1 K 1 R1 11 -HV AWG22 (VIOLET)
TACCA0002EH
SOCKET PIN No. 10
C3 C2 C1
SIGNAL GND SIGNAL OUTPUT RG-174/U(BLACK) POWER SUPPLY GND AWG22 (BLACK)
38.0 0.3 49.0 0.3
29 4
R1 to R10 : 330 k C1 to C3 : 10 nF
30.0 +0 -1
31.0 0.5
DY4
450 10
POTTING COMPOUND
Hamamatsu also provides C4900 series compact high voltage power supplies and C6270 series DP type socket assemblies which incorporate a DC to DC converter type high voltage power supply.
Warning-Personal Safety Hazards Electrical Shock-Operating voltages applied to this device present a shock hazard.
WEB SITE http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TPMS1033E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
JUL. 2002 IP

▲Up To Search▲

Price & Availability of R5984

	To Download R5984 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .